--- Printer Specify the type of printer to be used for printing maps anditineraries. Dot matrix printers must be Epson/IBM compat- ible and laser printers must be HP Laser-Jet II compatible. Click in the appropriate box. --- U.S. Map Display two-letter state (postal) codes, or the Interstate Highway System, or both on the map of the United States. Click in the appropriate box or boxes. --- Driving Speed Enter the percentage of the speed limit you expect to drive.For example, if you expect to drive a bit slower than the speed limit, you might enter '95'. The driving times betweenlocations will be adjusted accordingly. [CLICK TO CONTINUE] Use the 'Exit' button to return to the operating system. Ifyou created a new trip prior to selecting this button, the 'Save Trip File?' panel will appear. To save the trip, select the 'Yes' button, enter a trip name (eight charactersor less), and press 'Enter'. Select the 'No' button to exitwithout saving the trip. [SELECT ANOTHER BUTTON] Use the 'File' (Files) button to delete or copy (and rename)saved trip files. After this button is selected, the 'Trip Files' panel will appear. Delete a saved trip file by first selecting the 'Delete' button. Then, click anywhere in the 'File Name' field to display a list of file names. Double-click on the name of the file to delete and then select the 'OK' button. Copy a saved trip file by first selecting the 'Copy' button.Then, click anywhere in the 'File Name' field to display a list of file names. Double-click on the name of the file tocopy, enter a 'New Name' (eight characters or less), and then select the 'OK' button. Select the 'Quit' button to leave this option without deleting or copying a trip file. [SELECT ANOTHER BUTTON] Use the 'Prnt' (Print) button to make prints of the maps displayed on the screen. This feature is available for Epson/IBM compatible dot matrix printers only. The IBM modeis recommended for the map prints. [SELECT ANOTHER BUTTON] Use the 'Zin' (Zoom-in) button to zoom-in on any area of themap. After this button is selected, a frame will appear on the map. Move the cursor to the center of the area of interest and click once to move the frame. Then, double- click to perform the zoom to the first zoom-level. Repeat this procedure to zoom into the second zoom-level. [SELECT ANOTHER BUTTON] Use the 'Zout' (Zoom-out) button to return to the previous zoom-level or to the full map of the United States. [SELECT ANOTHER BUTTON] Use the 'Pan' button to re-center the map on a point you choose. After selecting on this button, move the cursor to the new center point and click once. [SELECT ANOTHER BUTTON] Use the 'Map' (US Map) button to return directly to the fullmap of the United States from either zoom-level. [SELECT ANOTHER BUTTON] Use the 'Plan' (Plan a Trip) button to plan a new trip or toload a saved trip back into the program. New trips must be started in the first or second zoom-levels. A saved trip can be loaded from a zoom-level or from the map of the United States. After this button is selected, the 'Plan a Trip' panel will appear. To start a new trip, select the 'New Trip' button. If you created a new trip prior to selecting this button, the 'Save Trip File?' panel will appear. If you wish to savethat trip, select the 'Yes' button, enter a trip name (eightcharacters or less), and press 'Enter'. Select the 'No' button to continue without saving the trip. [CLICK FOR NEXT PAGE] To load a saved trip, select the 'Load Trip' button. Then, click anywhere in the 'File Name' field to display a list ofsaved trip file names. Double-click on the file name to load, then select the 'OK' button. The loaded route will bedisplayed on the screen. Select the 'Quit' button to leave this option without starting or loading a trip. Planning a route for your trip requires that you click on city and junction markers in a point-to-point manner. Do not skip any intermediate markers. See the MANUAL.DOC file for the details of planning a route (and adding features). [SELECT ANOTHER BUTTON] Use the 'Back' (Back-up) button to alter the route you are planning. After selecting this button, move the cursor to any marker on the planned route and click once. The route will be redrawn to that point and continued from there. [SELECT ANOTHER BUTTON] Use the 'Itin' (Itinerary) button to prepare an itinerary and an estimate of expenses for the route you have planned. The 'Itinerary' screen will appear, showing the departure and arrivals times at each location along the route. Certain fields need to be changed in preparing the itineraryand estimate of expenses. To change a field on this screen,first move the underline cursor to that field by clicking anywhere in the field. Use the mouse or keyboard to move the underline cursor to any character position in the field.Finally, key-in the necessary information. The first departure time should be changed to the time you plan to start your trip. Move the underline cursor to that field and change the time (from 12:00p to 09:30a, for example). Then, select the 'Recalc' button to recalculate arrival and departure times. [CLICK FOR NEXT PAGE] In the 'Stop Time' column, show the time for any stops you expect on the trip. Move the cursor to the appropriate fieldand enter the time for that stop. Select the 'Recalc' buttonto include these times in the departure/arrival times. To plan an overnight stop at a location, enter the word 'stop' instead of a time in the arrival/stop time field of that location. Select the 'Recalc button. Change the departure time for that location to the time you plan to leave the next day. Select the 'Recalc' button again. Use the 'Exps' column to enter expenses; such as food, gas, and lodgings for each leg of your trip. Use the 'Notes' column to record highway numbers, dates, a breakdown of expenses, and any other information important to your trip. Select the 'Print' button to print the itinerary and the 'Quit' button to return to the main screen. [SELECT ANOTHER BUTTON] Use the 'City' button to display maps of the major cities inthe United States. After selecting this button, move the cursor to any of the city markers circled in white and clickonce. When the city map appears, use the buttons in the lower left portion of the screen only. To display information about a point-of-interest in the city, click on any name in the list shown at the left of thescreen. Then, select the 'OK' button. Click again to removethe display. Select the 'Info' button to display weather, population, and altitude information for the city. Select the 'Print' button to print the map and the 'Quit' button toreturn to the main screen. [SELECT ANOTHER BUTTON]
